Speeding - Europes motorsport warehouse

without VAT/Customs duty may apply

Build your own brake hose

Here you can easily build your own steel braided brake hose / clutch hose / hydraulic hose. All hoses are crimped in special crimping machines at Speeding.

  1. Sort by AN3 (brake hose) or AN4 (inlet / from reservoir).
  2. Sort by Galvanized or Stainless fittings.
  3. Click on the hose builder that show and follow the 5 step instructions in the guide.
Filter

Products


There are no products to list in this category.


Custom steel braided brake hose

Banjo fittings are not available in 3/8" and 7/16"?
3/8"-24 banjo bolt fits together with 10mm banjo fittings.
7/16"-20 banjo bolt fits together with 12mm banjo fittings

I want to copy my original brake hose.
By finding out how long the hose is and which connections you have at each end, we can copy the brake hose for you. Make sure we have your thread type/size here.

What different types of fittings can be chosen at the ends of the brake hose?
The different fittings we have can be found at this link.

How-to determine the correct length for your brake hose?

  • Use a line or rope to measure the length from chassis to the brake caliper.
  • Attach the line to the damper body or control arm somewhere in the middle.
  • Turn the wheels fully in both directions and make sure it doesn't interfere with the wheel or anything else.
  • Account for length if using angled fittings
  • Keep in mind that a small difference in length can have a significant impact on the end result.