Driveshaft seal Reinforcement plates Volvo 240 / 740 / 940
Andersson Steel Speed
Mainly used in drifting when you get a lot of load on the drive shafts laterally and thus high pressure against the outer stuffing box which begins to leak because the original plate gives way.
This often results in getting rear axle oil on the brake disc, which is not good at all!
This easy-to-install reinforcement plate is made in two parts per side so that you don't have to remove both the drive shaft and bearing.
It is mounted over the original sheet metal that will hold the packing box in place.
Reviews
Help others choose right. Be the first to write a review!
Write a reviewMainly used in drifting when you get a lot of load on the drive shafts laterally and thus high pressure against the outer stuffing box which begins to leak because the original plate gives way.
This often results in getting rear axle oil on the brake disc, which is not good at all!
This easy-to-install reinforcement plate is made in two parts per side so that you don't have to remove both the drive shaft and bearing.
It is mounted over the original sheet metal that will hold the packing box in place.
New longer screws for mounting are included.
----------------
Guides & Info
| Bilmärke | Volvo |
| Bilmodell | 200 |
| Bilmodell | 700 |
Be first to write a review about this product!
Your review:
To send a review, you must be logged in.